Cincinnati · Industrial · § 1413-04

MA-MH — Missing Middle Housing overlay

MA-MH layers the Missing Middle Housing overlay onto MA. Connected Communities Missing Middle Housing overlay. Key controls include 25 ft front setback, 35 ft max height. Allows Attached Single Family, Developmental Disability Dwelling, Loft Dwelling, Shared Housing Elderly, Single Family. Source: § 1413-04.

Capacity-readyAttached Single FamilyDevelopmental Disability DwellingLoft DwellingShared Housing Elderly

Missing Middle Housing overlay status: modeled as a live code variant.

Source

§ 1413-04

Chapter 1413 — Manufacturing Districts

Capacity readiness

Capacity-ready

Open Municode

Min lot area

20,000 sf

Front setback

25 ft

Rear setback

20 ft

Max height

35 ft

Parking

0 spaces for first 10 units; 0.5 spaces/unit above 10

Capacity Readiness

Capacity-ready

Zoning source coverage is sufficient for a site-specific capacity sweep. Site frontage, access, parking, utilities, and subdivision gates are still parcel-specific.

Attached Single FamilyDevelopmental Disability DwellingLoft DwellingShared Housing ElderlySingle Family

Source Coverage

Not Applicable: 1
Not Modeled: 5
Not Specified In Source: 2
Present: 6

Flagged Fields

Min Lot Area Per Unit Sf: Not Modeled
Min Lot Width Ft: Not Specified In Source
Max Height Stories: Not Specified In Source
Max Lot Coverage Pct: Not Modeled
Max Far: Not Modeled
Max Units: Not Modeled
Parking Per Unit: Not Modeled

Key Development Standards

Standard	Value	Coverage note
Minimum lot area	20,000 sf	Published
Minimum lot area per unit	Not applicable in source schedule	Not applicable § 1413-07 includes a land-area-for-every-dwelling-unit row; this district's cell is an em dash in the source schedule.
Minimum lot width	Not published as a district-wide standard	Not published district-wide Current Cincinnati manufacturing source chapters do not expose a minimum lot width row for these districts in either the tracked snapshot or the live Municode API payload.
Front setback	25 ft	Published
Total side setback	20 ft	Published
Rear setback	20 ft	Published
Maximum height	35 ft	Published
Maximum stories	2.5 stories	Derived Derived from another published zoning control.
Maximum lot coverage	Not published as a district-wide standard	Not published district-wide § 1413-07 publishes minimum lot area, maximum height, and minimum yards for manufacturing districts; it does not publish this field.
Maximum FAR	Not published as a district-wide standard	Not published district-wide § 1413-07 publishes minimum lot area, maximum height, and minimum yards for manufacturing districts; it does not publish this field.
Maximum dwelling units	Not published as a district-wide standard	Not published district-wide § 1413-07 publishes minimum lot area, maximum height, and minimum yards for manufacturing districts; it does not publish this field.
Parking per unit	0 spaces for first 10 units; 0.5 spaces/unit above 10	Overlay standard Connected Communities Middle Housing overlay — no parking for residential uses in new buildings with 10 or fewer dwelling units; 0.5 space per dwelling unit above 10; no parking for new commercial or mixed-use buildings with 5,000 sq ft or less of commercial space; underlying commercial requirement is reduced by one-half above 5,000 sq ft; accessory surface parking shall be located in the rear yard.
Ground-floor transparency	Not used in this district	Not used here
Overlay effect	Live code modeled	Missing Middle Housing Middle Housing overlay does not change base dimensional standards. Middle Housing overlay permits 2-4 family residential uses. Middle Housing overlay reduces residential parking and reduces commercial or mixed-use parking above 5,000 sq ft of commercial space. Middle Housing overlay requires accessory surface parking to be located in the rear yard.

Allowed Building Types

Attached Single Family
Developmental Disability Dwelling
Loft Dwelling
Shared Housing Elderly
Single Family

Sources And Notes

This app page is generated from the public Cincinnati zoning catalog and verified Municode source links.

This row reflects the nonresidential schedule values from § 1413-07.
Residential-bearing use rows carry separate residential minimum lot area and yard controls in building_type_standards.
Connected Communities overlays can modify height, parking, and lot-area-per-dwelling-unit standards where they apply.
Middle Housing overlay does not change base dimensional standards.
Middle Housing overlay permits 2-4 family residential uses.
Middle Housing overlay reduces residential parking and reduces commercial or mixed-use parking above 5,000 sq ft of commercial space.
Middle Housing overlay requires accessory surface parking to be located in the rear yard.